Beam Line Diagnostics Equipment
|
|
Beam Line Diagnostics Equipment & Survey
|
| Equipment listing
| (incl. settings)
| EDMS
|
|
|
|
Beam Position Monitors (BPM)
|
| Commissioning of TBTS probe beam BPMs
| A. Palaia
| EDMS
|
| Software Requirements for CTF3 TL2 and CLEX BPMs
| L. Soby
| EDMS
|
| Resistive titanium coating on BPM ceramics
| W. Vollenberg
| EDMS
|
| Geometric measurements of the BPM supports
| D. Pugnat
| EDMS
|
| BPM calibration
| M. Johnson
| EDMS
|
| Acquisition chain for CTF3 pick-ups read-out
| J. Jacquemier et al.
| LAPP-TECH-2009-01
|
| CTF3 Beam Position Monitor Acquisition System
| S. Deghaye et al.
| ICALEPCS07
WPPB01
|
| Limiting High Frequency Longitudinal Impedance of an Inductive Pick-up by a Thin Metallic Layer
| M. Gasior
| EPAC 2004
THPLT010
|
| An Inductive Pick-Up for Beam Position and Current Measurements
| M. Gasior
| DIPAC 2003
CT01
|
| Hardware of the CTF3 Beam Position Measurement System
| M. Gasior
| CTF3 Note 053
|
| Head Electronics for IPU-CTF3
| M. Gasior
| EDA-00108
|
| Universal Distribution Amplifier
| M. Gasior
| EDA-00088
|
| CTF3 Electrostatic Head Amplifier
| J.L. Chouvet
| EDA-00019
|
| CTF3 Magnetic Pick-up
| M. Gasior
| PS/BD-PU 0011
J24992, J24992
|
| Calibration Current Generator
| M. Gasior
| EDMS
|
|
|
|
Video Profile Monitors (MTV)
|
| Metrology report MTV (Saclay type with UU/CAI support)
| D. Pugnat
| EDMS
|
| Metrology report MTV (CERN TL2 type)
| C. Bal
| EDMS
|
| Optimizing reliability and identifying current limitations of the MTV system for 5 Hz CTF3 operation
| E. Bravin et al.
| PDF
|
| A new Control System for the CERN TV Beams Observation
| S. Burger and E. Bravin
| CDS (2008)
CERN-AB-Note-2008-041-BI
|
|
|
|
Wall Current Monitor (WCM)
|
| A New Wide Band Wall Current Monitor
| P. Odier
| DIPAC 2003
PT20
|
|
|
CTF3-TBTS